Weihai Global Chemical Machinery MFG Co.,Ltd

Specifications and Technical Parameters

Type

GSH-500~20,000L

Volume(L)

500~20,000L

Working pressure(MPa)

Negative pressure -0.1~9.8

Working temperature(°C)

-196~350

Stirring speed(r/min)

0~300

Motor power(KW)

3~45

Heating power(KW)

36~90

Heating type

Electric heating, far infrared heating, high frequency heating.

Water recycling, thermal oil or steam through jacket by constant temperature slot.

Charging type

Charging from above, discharging from bottom.

Shaft

Adopt self-lubricating wear-resistant sleeve, suitable for mixing various media.

Stirring type

Anchor-type, frame-type, blade-type, turbine-type, scraper-type or modular-type.

Seal type

Magnetic seal, mechanical seal, packing seal and gasket seal.

Motor

General DC motor, DC servomotor or explosion-proof motor according to customers' requirements.

Main material

Contacting material inside kettle mainly use 0Cr18Ni9 (304), 00Cr17Ni14Mo2 (316L), 1Cr18Ni9Ti (321), also can be produced by titanium (TA2), nickel, zirconium, hastelloy, etc, or lined with PTFE, PPL, PFA and Ni (Ni6) according to different requirements of reaction media.

Opening port of conventional kettle lid

Gas port and liquid port with needle valve, Bottom insert tube for sampling or inserting, Solid charging port with flange or visual glass, Measuring and controlling temperature port with platinum resistance, Security blasting port with safety device (blasting disc) and Pressure gauge, as well as cooling coil inlet and outlet inside the reactor with tap.

Controller Device

Equipped with automatic or programmed PID or PLC which can achieve:

Temperature display and control, accuracy ± 1 °C (or ±0.1 °C);

Mixing Speed display and control;

Pressure display and control;

Level display and control;

Flow display and control;

Valve open/close control, etc.

Other Accessories

We can design and manufacture various reactors as per customer’s request. If user have other special requirements on kettle cover, kettle body opening, internal structure, stirring paddle, and other supporting device (such as condensate return unit, constant feeding tank, receiver, condenser, etc.), we can help customer to achieve their request, can also equip necessary instruments as request.